ODM Hand Laser Welder – Melt-Blown Spinning Machine Melt Blown Water Polting Production Line – Jinggong
ODM Hand Laser Welder – Melt-Blown Spinning Machine Melt Blown Water Polting Production Line – Jinggong Detail:
Melt-Blown Spinning Machine Melt Blown Water Polting Production Line
Description
The production line consists of unwinding system, pure water preparation system, Spunlaced electret system (water ring vacuum pump unit), drying and locking system, slitting and winding system and other components. The prepared pure water is delivered to the fan-shaped nozzle by high-pressure pump. The fan-shaped nozzle spurs the melt blown non-woven fabric on one side. The electric charge is generated by the friction between the pure water and the melt blown cloth to complete the spunlaced electrostatic electret.
Tech Specs
● Model: jgrmwel-1600;
● Equipment size: 18m (L) x 8m (W) x 3.5m (H);
● Rated power: About 500kW;
● Resistivity of ultrapure water: 15-18.2m Ω cm
● Output: 1.5-2 tons per day (according to the quality grade of melt blown fabric);
● Width of electret of finished fabric: 1600mm;
● Filtration grade of finished cloth: when the air volume is 95L / min, the test filtration rate of paraffin oil should reach the oily P2 (96 ~ 97% above).
Advantages
Compared with the traditional production line of corona electret melt blown fabric, the spunlaced electret production line developed by our company after spunlacing, the fabric performance is saturated with static electricity, and the static electret retention time is longer; It can effectively solve the difficulties of improving the electret efficiency and reducing the efficiency after storage in the mask industry; The equipment has a high degree of automation and low requirements for operators; The filtration efficiency of spunlaced electret can reach more than 95% or even more than 99%. Static electricity does not decay (up to more than 2 years), and low resistance (about 3 ~ 40%) is low resistance and high efficiency; Equipment installation, operation training and maintenance are supplemented with detailed documents and materials to relieve customers of difficulties in daily operation and maintenance.
Product Video
FAQ
User Evaluation
Stable and reliable operation of production line, produced by large factories!The after-sales response was very fast. I was most worried that the machine would stop. The engineer immediately solved the problem remotely.
Product Show
Product detail pictures:
Related Product Guide:
Our merchandise are commonly recognized and reliable by customers and can meet constantly developing economic and social desires for ODM Hand Laser Welder – Melt-Blown Spinning Machine Melt Blown Water Polting Production Line – Jinggong , The product will supply to all over the world, such as: Belarus, Canberra, Paraguay, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Ada from Peru - 2018.09.23 18:44
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Sharon from Ecuador - 2017.08.18 11:04
